Maintenance Products & Cleaning Instructions

Oiled Wood Floors

Maintenance Instructions

Daily: Vacuum or Sweep

Vacuum or sweep the floor to remove dust, sand and dirt that may become abrasive to the floor.

Bi-Weekly: Damp Mop

Damp mop the floor with Euku Care Emulsion – mix 1 tablespoon of Care Emulsion to 1 litre of luke warm water.

Do not soak the floor – Allow floor to dry completely before walking on it
*For more information, please refer to the instructions on the bottle

1-5 Years: Refreshing

Refresh your hardwood floor – Contact Wide Plank Hardwood for further information and services

Refreshing Instructions
To be completed as required 

Clean the floor thoroughly before care treatment with a slightly damp mop. Apply Euku Refresher onto the floor with a cloth. After allowing it to soak in for 30 minutes, polish out the remaining excess. Do not allow any moist oil to remain on the surface.

Please note:

  • Optimal application is with the T-Wiper and cloth-strip
  • For polishing out on large areas we recommend using a monodisc-machine

Recommended Products

Water Based Poly-urethane Wood Floors

Strato – Water based poly-urethane floors are easy to maintain, but it is very important to follow the cleaning instructions and only use an approved cleaning product. This will help the performance of your floor while keeping it beautiful.

Please read through these instructions carefully. Should you have any questions, please feel free to contact us.

Cleaning Instructions

Vacuum regularly with an upright canister with a floor brush attachment. If the vacuum has a power head feature, turn off the rotating brush to prevent bristles from scratching the floor.
Vacuuming will effectively remove dirt, sand and other abrasive particles that can scratch the floor.

Routine dusting should be done with a dry, clean Fiber Pad Mop.

Wipe up food and other spills immediately with a dampened (not soaking wet) absorbent cloth or a soft paper towel.

From our experience with several products on the market, we found Euku Clean to be the most suitable for our WPH Water-based Poly-urethane finish.

  • Fresh Scent
  • Leaves no residue
  • No rinsing required
  • Recyclable contained

Once the floor has been vacuumed, clean the floor with the recommended cleaning product and a dampened (not soaking wet)  Fiber Pad Mop. If using the concentrated Euku Clean Wood Floor Cleaner, premix 50 ml of cleaner to 8-10 Liters of warm water.
Allow the floor to air dry completely before walking on the cleaned floor.

Note: Do not soak the floor at any time

Remove grease marks and other dirt sticking to the floor with undiluted Euku Clean and a non-abrasive white pad.

Note: Do not wash newly installed floor for the first two weeks 

Recommended Products